Lock Setup
Stash Box Lock Setup:
- Set to current code (Default Code 0-0-0)
- Open lock by pressing latch to the RIGHT then release latch
- Hold the latch to the LEFT
- While continuing to hold latch to the LEFT, set new desired code
- When you have entered new desired code release latch to neutral position
- New code has been set
Stash Bag Lock Setup:
- Set lock to current code (Default Code 0-0-0)
- Open lock by pressing latch to the RIGHT (for grey bag) or LEFT (for green bag) then release latch
- Press down circular pin on top of lock with pen or other object
- Pin will click and stay depressed
- Lock is now in program mode
- Enter new code
- When new code is enteredĀ press latch to the right (for grey bag) or left (for green bag)
- The circular pin will pop back up and the new code is setĀ
Ā
Priming your Strain StylosĀ for first use:
- Wet tip with water.
- Shake pen to mix ink.
- Press and hold the pen foam tip down on a surface for approximately 20 seconds or until ink saturates tip.
- Press and hold the foam tip down for 20 seconds on a surface and you should start to see the ink fill the foam tip. (The foam tip will retract inside the pen approx 1/4")Ā
- Repeatedly press and release the foam tip on a surfaceĀ to add more ink
- The white foam tip should now be the colour of the liquid ink and is now ready to write on surfaces
- Occasionally shake and press the pen foam tip repeatedly to saturate the pen foam tip
- If the ink ever gets dried out you can add a little bit of water to the pen foam tip to help get the ink flowing again
Label and color code your stash with theĀ Industry Standard Colors:
PurpleĀ - Indica
OrangeĀ -Ā Sativa
GreenĀ - Hybrid